Specifications

STB NIP 2311 Services
EIO0000000051 6/2010 151
Assigning a Stored IP Address
Enter a stored IP address for the STB NIP 2311 module after you have accessed
the embedded web pages (see page 145):
NOTE: Changes made to the stored IP configuration and rotary switch settings take
effect after you reboot the STB NIP 2311 module with the Reboot Page
(see page 177) or after a power cycle of the module.
Step Action
1 Click the Setup menu command. The Setup page opens.
2Select Stored IP on the left to open the IP Configuration page.
3 In the IP Configuration page, enter values for:
z IP Address: Enter four octet values (0...255) as a unique IP address. (The first
octet must be in the range 1...126 or 128...233.)
z Subnet Mask: Enter four octet values (0...255).
z Default Gateway (optional): Enter four octet values (0...255). This value must
reside on the same subnet as the IP address.
4 Click one of the following:
z Apply: Save the edited IP addressing parameters.
z Undo: Clear the page without saving your edits.