Specifications

STB NIP 2311 Services
EIO0000000051 6/2010 149
The Change Password Page
Introduction
Use this web page to edit the password that must be entered (along with a user
name) when accessing the STB NIP 2311 NIM’s embedded web pages:
NOTE: The embedded web pages support the use of a single, non-editable user
name: USER. Both this user name and the password are case-sensitive.
Changing the Password
Change the password for access to the STB NIP 2311 after you have accessed the
module’s embedded web pages (see page 145):
Monitoring Control Diagnostics Maintenance Setup
Name
Password
New Password
Confirm New Password
Apply
Undo
CHANGE PASSWORD
Change Password
Step Action
1 Click on the Setup menu command to open the Setup page.
2 Select Setup → Change Password on the left to open the Change Password
page.
3 In the Change Password page, type in values for the following fields:
z Name: user name (always USER)
z Password: existing password (default = USER)
z New Password: new password
z Confirm New Password: new password (again)
NOTE: The password is case-sensitive.
4 Click either:
z Apply: Save the new password.
z Undo: Clear the page without saving your edits.