Specifications

STB NIP 2311 Services
130
EIO0000000051 6/2010
4 The STB NIP 2311 is configuring or auto-configuring: The NIM checks for any modules
that are not auto-addressed.
5 The STB NIP 2311 is configuring or auto-configuring. Advantys STB and preferred
modules are being auto-addressed.
6 The STB NIP 2311 is configuring or auto-configuring. Boot-up is in progress.
7 The process image is being set up.
8 Initialization is complete, the island bus is configured, the configuration matches, and the
island bus is not started.
9 Configuration mismatch: Non-mandatory or unexpected modules in the configuration do
not match, and the island bus is not started.
10 Configuration mismatch: At least 1 mandatory module does not match, and the island bus
is not started.
11 Serious configuration mismatch: the island bus has been set to pre-operational mode, and
initialization is aborted.
12 The configuration matches, and the island bus is operational.
13 The island is operational with a configuration mismatch. At least 1 standard module does
not match, but all the mandatory modules are present and operating.
14 Serious configuration mismatch: The island bus was started but is now in pre-operational
mode because of 1 or more mismatched mandatory module(s).
15 The island has been set to pre-operational mode, for example, by the stop function.
16 A value of 1 in bit 8 indicates a low-priority receive queue software overrun. (See note
below.)
17 A value of 1 in bit 9 indicates a NIM overrun.
18 A value of 1 in bit 10 indicates that the island bus is off. (See note below.)
19 A value of 1 in bit 11 indicates that NIM has reached the alert level and the event status bit
has been set.
20 A value of 1 in bit 12 indicates that the NIM’s event status bit has been reset. (See note
below.)
21 A value of 1 in bit 13 indicates a low-priority transmit queue software overrun. (See note
below.)
22 A value of 1 in bit 14 indicates a high-priority receive queue software overrun. (See note
below.)
23 A value of 1 in bit 15 indicates a high-priority transmit queue software overrun. (See note
below.)
NOTE: Conditions described in 16, 20, 21, 22, and 23 make the NIM inoperable.
Internal NIM events, events in the island configuration, or events in the software can
stop the island bus. To get out of this state:
Step Action
1 Cycle the power.
2 Reset the island from the Advantys Configuration Software.
3 Clear the status bits with the Advantys Configuration Software.