Specifications

Glossary
31007715 6/2008 423
slice I/O An I/O module design that combines a small number of channels (usually between
2 and 6) in a small package. The idea is to allow a system developer to purchase
just the right amount of I/O and to be able to distribute it around the machine in an
efficient, mechatronics way.
SM_MPS state management_message periodic services. The applications and network
management services used for process control, data exchange, error reporting, and
device status notification on a Fipio network.
SNMP simple network management protocol. The UDP/IP standard protocol used to
manage nodes on an IP network.
snubber A circuit generally used to suppress inductive loads—it consists of a resistor in
series with a capacitor (in the case of an RC snubber) and/or a metal-oxide varistor
placed across the AC load.
source load A load with a current directed into its input; must be driven by a current source.
standard I/O Any of a subset of Advantys STB input/output modules designed at a moderate cost
to operate with user-configurable parameters. A standard I/O module may be
reconfigured with the Advantys Configuration Software and, in most cases, may be
used in reflex actions.
standard
network
interface
An Advantys STB network interface module designed at moderate cost to support
the configuration capabilities, multi-segment design and throughput capacity
suitable for most standard applications on the Island bus. An Island run by a
standard NIM can support up to 32 addressable Advantys STB and/or preferred I/O
modules, up to 12 of which may be standard CANopen devices.
standard power
distribution
module
An Advantys STB module that distributes sensor power to the input modules and
actuator power to the output modules over two separate power buses on the Island.
The bus provides a maximum of 4 A to the input modules and 8 A to the output
modules. A standard PDM requires a 5 A fuse to protect the input modules and an
8 A fuse to protect the outputs.
STD_P standard profile. On a Fipio network, a standard profile is a fixed set of configuration
and operating parameters for an agent device, based on the number of modules that
the device contains and the device’s total data length. There are 3 types of standard
profiles: Fipio reduced device profile (FRD_P), Fipio standard device profile
(FSD_P), and the Fipio extended device profile (FED_P).
stepper motor A specialized DC motor that allows discrete positioning without feedback.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com