Specifications

Bases
390
31007715 6/2008
Advantys Bases
Summary There are six different base units. When interconnected on a DIN rail, these bases
form the physical backplane onto which the Advantys modules are mounted. This
physical backplane also supports the transmission of power, communications and
PE across the island bus.
Base Models The table below lists the bases by model number, size and types of Advantys
modules that they support.
Base Model Width Modules Supported
STB XBA 1000
(see p. 391)
13.9 mm (0.58 in) size 1 Advantys input and output modules
STB XBA 2000
(see p. 395)
18.4 mm (0.72 in) size 2 Advantys input and output modules and the
STB XBE 2100 CANopen extension module
STB XBA 2200
(see p. 399)
18.4 mm (0.72 in) All Advantys PDM modules
STB XBA 2300 18.4 mm (0.72 in) STB XBE 1200 BOS island bus extension
modules
STB XBA 2400 18.4 mm (0.72 in) STB XBE 1000 EOS island bus extension
modules
STB XBA 3000 27.8 mm (1.09 in) size 3 Advantys specialty modules
Note: You must insert the correct base in each location on the island bus to support
the desired module type. Notice that there are three different size 2 (18.4 mm)
bases. Make sure that you choose and install the correct one at each position on
the island bus.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com