Specifications

Power Distribution Modules
31007715 6/2008 383
Ordering
Information
The module can be ordered as part of a kit (STB PDT 3105 K), which includes:
z one STB PDT 3105 power distribution module
z one STB XBA 2200 (see p. 399) PDM base
z two alternative sets of connectors:
z one 2-terminal screw type connector, keying pins included
z one 2-terminal spring clamp connector, keying pins included
z a 5 A, 250 V time-lag, low-breaking-capacity (glass) fuse to protect the input and
output modules
Individual parts may also be ordered for stock or replacement as follows:
z a standalone STB PDT 3105 power distribution module
z a standalone STB XBA 2200 PDM base
z a bag of screw type connectors (STB XTS 1130) or spring clamp connectors
(STB XTS 2130)
z the STB XMP 5600 fuse kit, which contains five 5 A replacement fuses and five
10 A replacement fuses
Additional optional accessories are also available:
z the STB XMP 6700 user-customizable label kit, which may be applied to the
module and the base as part of your island assembly plan
z the STB XMP 7700 kit for inserting the module into the base (to make sure that
an AC PDM is not inadvertently placed on the island where an STB PDT 3105
PDM belongs)
z the STB XMP 7800 kit for inserting the field wiring connectors into the module
For installation instructions and other details, refer to the Advantys STB System
Planning and Installation Guide (890 USE 171).
Dimensions
Note: Do not use the 10 A fuses in the STB PDT 3105 module.
width module on a base 18.4 mm (0.72 in
height module only 125 mm (4.92 in)
on a base* 138 mm (5.43 in)
depth module only 65.1 mm (2.56 in)
on a base, with connectors 75.5 mm (2.97 in) worst case
(with screw clamp connectors)
* PDMs are the tallest modules in an Advantys STB island segment. The 138 mm height
dimension includes the added height imposed by the PE captive screw clamp on the bottom
of the STB XBA 2200 base.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com