Specifications

Power Distribution Modules

382

31007715 6/2008

The following illustration shows the right side of the module, where the user-

replaceable fuse is housed:

1 housing door for the 5 A fuse

2 this slot is not used

3 notches in the two doors

4 burn hazard statement

The marking on the side of the module describes a simple precaution you need to

take before replacing a fuse (see p. 377) to prevent burns:

BURN HAZARD - HOT FUSE

Disconnect power for 10 minutes before removing fuse.

Failure to follow these instructions can result in injury or equipment damage.

CAUTION

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com