Specifications

Power Distribution Modules
31007715 6/2008 379
STB PDT 3100 Specifications
Table of
Technical
Specifications
The STB PDT 3100 module’s technical specifications are described in the following
table.
description 24 VDC power distribution module
module width 18.4 mm (0.72 in)
module height in its base 137.9 mm (5.43 in)
PDM base STB XBA 2200
hot swapping supported no
nominal logic power current
consumption
0mA
sensor/actuator bus voltage range 19.2 ... 30 VDC
reverse polarity protection yes, on the actuator bus
module current
field
for outputs 8 A rms max @ 30° C (86° F)
5 A rms max @ 60° C (140° F)
for inputs 4 A rms max @ 30° C (86° F)
2.5 A rms max @ 60° C (140° F)
overcurrent
protection
for inputs user-replaceable 5 A time-lag fuse from an STB XMP
5600 fuse kit
for outputs user-replaceable 10 A time-lag fuse from an STB XMP
5600 fuse kit
bus current 0 mA
voltage surge protection yes
PE current 30 A for 2 min
status reporting to the two
green LEDs
sensor bus power present
actuator bus power present
voltage-detect
threshold
LED turns on at 15 VDC (+/- 1 VDC)
LED turns off less than15 VDC (+/- 1 VDC)
storage temperature -40 to 85°C
operating temperature range* 0 to 60°C
agency certifications refer to the Advantys STB System Planning and
Installation Guide, 890 USE 171
*This product supports operation at normal and extended temperature ranges. Refer to the
Advantys STB System Planning and Installation Guide, 890 USE 171 for a complete
summary of capabilities and limitations.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com