Specifications

Analog Output Modules

354

31007715 6/2008

STB AVO 0200 Field Wiring

Summary The STB AVO 0200 module uses two six-terminal field wiring connectors. Analog

actuator 1 is wired to the top connector, and the analog actuator 2 is wired to the

bottom connector.

Connector Types Use a set of either:

z two STB XTS 1100 screw type field wiring connectors (available in a kit of 20)

z two STB XTS 2100 spring clamp field wiring connectors (available in a kit of 20)

These field wiring connectors each have six connection terminals, with a 3.8 mm

(0.15 in) pitch between each pin.

Field Actuators The STB AVO 0200 module supports two 2-wire analog actuators. It handles analog

outputs ranging from 1to5VDC, 0to5VDC, 0to10VDC, +/-5VDC, or +/-

10 VDC. Data on each channel has a resolution of 15 bits plus sign.

Field Wire

Requirements

Individual connector terminals accept one field wire. Use wire sizes in the range

0.5...1.5mm

(24 ... 16 AWG).

Shielded twisted-pair wire is recommended. The shield should be tied to an external

clamp that is tied to functional earth.

We recommend that you strip at least 9 mm from the wire’s jacket for the module

connection.

Field

Wiring Pinout

Pin Top Connections Bottom Connections

1 no connection no connection

2 no connection no connection

3 output to actuator 1 output to actuator 2

4 output channel return output channel return

5 no connection no connection

6 no connection no connection

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com