Specifications

Analog Output Modules
31007715 6/2008 331
actuator bus power for accessories 100 mA/module
over-current protection for accessory power yes
field power requirements from a 24 VDC PDM
power protection time-lag fuse on the PDM
agency certifications refer to Advantys STB System
Planning and Installation Guide,
890 USE 171
*ATEX applications prohibit hot swapping-refer to the Advantys STB System Planning and
Installation Guide, 890 USE 171
**Basic NIMs do not allow you to hot swap I/O modules.
Note: The field actuators or inputs driven by these nonisolated output channels
must be independent (isolated). Cross-channel errors can be generated if
nonisolated inputs or actuators are used.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com