Specifications

Analog Output Modules
326
31007715 6/2008
If you want to use 24 VDC from the island’s actuator bus to power the single-ended
analog field devices, this power can be delivered through the output module. To do
this, use pins 1 and 6 as follows:
1 +24 VDC for actuator 1 (top) and for actuator 2 (bottom)
2 outputs to actuator 1 (top) and actuator 2 (bottom)
4 and 6 close the power loop by sending the field power return to the module return
Remember that using pins 1 and 6 defeats the built-in isolation between the analog
portion of the module and the island’s actuator bus.
1
2
4
6
I
+
-
FE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com