Specifications

Analog Output Modules

31007715 6/2008 311

If you want to use 24 VDC from the island’s actuator bus to power a single-ended

analog field device, this power can be delivered through the output module. To do

this, use pins 1 and 6 as follows

1 +24 VDC for actuator 1

2 output to actuator 1

4 and 6 close the power loop by sending the field power return to the module return

Remember that using pins 1 and 6 will defeat the built-in isolation between the

analog portion of the module and the island’s actuator bus.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com