Specifications

Analog Input Modules
244
31007715 6/2008
minimum input voltage -12 VDC
maximum input voltage +12 VDC
addressing
requirement
8 input words total 4 words for data
4 words for status
isolation field-to-bus 1500 VDC for 1 minute
channel-to-channel 200 VDC
analog module to
sensor bus
500 VDC
field power requirements from a 24 VDC PDM
power protection time-lag fuse on the PDM
*Basic NIMs do not allow you to hot swap I/O modules.
**This product supports operation at normal and extended temperature ranges. Refer to the
Advantys STB System Planning and Installation Guide, 890 USE 171 for a complete
summary of cabalities and limitations.
1
Requires Advantys configuration software
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com