Installation guide

72
Catalog numbers
Advantys
™
STB Distributed I/O
Solution 0
Parallel interface module STB EPI 2145
TeSys
®
Model U and TeSys
®
Quickfit Applications
(1) A template for producing customized labels is supplied on the documentation mini-CD-ROM.
(2) TeSys Mjodel U forward only and forward/reverse requires only 1 cable.
(3) TeSys Quickfit forward only requires 1 cable,
TeSys Quickfit forward/reverse requires 2 cables.
Catalog numbers
TeSys Model U starter-controller module
Type of power
supply
Voltage Catalog number Weight
kg
c 24 V STBEPI2145 0.165
STB EPI 2145
STB XBA 3000
Mandatory separate parts
Designation Use Length Catalog number Weight
kg
Base 28.1
mm(1.10")
Application-specific
module mounted on
DIN rail
– STBXBA3000 0.048
Connection cables
An RJ45 connector at
each end
Linking the
STB EPI 2145
module to the
starter-controller
TeSys Model U (2)
and TeSys
Quickfit (3)
0.3 m (0.98 ft) LU9R03 0.045
1 m (3.28 ft) LU9R10 0.065
2 m (6.56 ft) 490NTW00002 –
3 m (9.84 ft) LU9R30 0.125
5 m (16.4 ft) 490NTW00005 –
12 m (39.3 ft) 490NTW00012 –
Optional separate parts
Designation Use Sold in lots of Catalog number Weight
kg
Keying pin For application-
specific module
60 STBXMP7700 –
Sheets of
customizing labels
(1)
I/O bases and
modules
25 STBXMP6700 –
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com