Installation guide

53
0
Analog input modules
Current Multi range
2 4 2
4…20 mA 0…20 mA 4…20 mA and
0...20 mA
4…20 mA,
0...20 mA and
HART protocol tolerant
Thermocouples B, E, J, K, R,
S and T
Temperature probe Pt 100,
Pt 1000, Ni 100, Ni 1000, Cu 10
± 80 mV
10 bits 12 bits 15 bits + sign
5 ms for both channels 8 ms for 4 channels 80 ms for 4 channels –
– 150... 360 ms (depending on
the range)
10 ms for both channels 10 ms for 4 channels 85 ms for 4 channels 10 ms for both channels
Yes No No
Two STB XTS 1100 screw-type connectors or STB XTS 2100 spring-type connectors (6-channel)
STB XBA 1000 STB XBA 2000 STB XBA 1000
c 24 V
STB PDT 3100/3105
a 1780 V for 1 minute c 1500 V for 1 minute a 1780 V for 1 minute a 1500 V for 1 minute
c 30 V (when sensor voltage is separate from logic bus voltage) c 200 V –
–
Yes, time-lag fuse on the PDM power distribution module
– Yes, time-lag fuse on the PDM
power distribution module
No Yes No No
No Yes (2) Yes (2)
Basic Standard
STB ACI 1225 STB ACI 1230 STB ACI 0320 STB ACI 8320 STB ART 0200
62 62
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com