Installation guide

39
Description (continued)
Advantys
™
STB Distributed I/O
Solution 0
Digital Input/Output Modules
I/O module bases in 3 widths depending on modules:
These bases have:
v a place for a customized label STB XMP 6700 (1)
v 4 locations for placing module/base keying pins(1)
Removable connectors
These removable connectors have between 5 and 18 possible ways of coding the
module/connector keying pins (1).
Mechanical keying pins and identifiers
These devices ensure that each I/O module, its base and its wiring connectors are
properly matched after dismantling or replacement.
Customizing labels STB XMP 6700 make it much easier to recognize I/O modules
and their bases.
External cable shielding connector
This optional device allows quick and easy connection of external cable shielding(1).
Digital input modules and digital output modules (c 24 V, a 115/220 V and 2A relay)
include a ground connection which makes this accessory optional in those cases.
For analog modules, it is advisable to this device as it allows quick and easy
connection of external cable shielding (1).
(1) To find out:
- the coding of keying pins
- how to use the CEM kit
consult the system planning and installation guide included on the CD-ROM STB SUS 8800
or available on our website www.us.telemecanique.com
.
(2) Template file for printing labels on a laser printer (color or black and white) or manual marking
with indelible felt pen: included on the mini CD-ROM supplied with each NIM network interface
module or available from our website www.us.telemecanique.com
.
Description (continued)
Mandatory items to be ordered separately
Module size Width Base catalog number
1 13.9 mm (0.547") STBXBA1000
2 18.4 mm (0.72") STBXBA2000
3 28.1 mm (1.10") STBXBA3000
Connector type
(2 connectors per
module)
5 pins 6 pins 18 pins
Screw terminals STBXTS1110
(sachet of 20)
STBXTS1100
(sachet of 20)
STBXTS1180
(sachet of 2)
Spring terminals STBXTS2110
(sachet of 20)
STBXTS2100
(sachet of 20)
STBXTS2180
(sachet of 2)
Optional items to be ordered separately
Keying between
module and base (1)
Keying between
module and
connectors (1)
Module
identification (2)
Base identification
(2)
STBXMP7700 STBXMP7800 STBXMP6700 STBXMP6700
Connection and shielding kit
Lateral supports and metal bar, length 1m
Terminals for
grounding kit
Cable clamp size 1 (sachet of 10)
for shielded cable with external diameter 1.5 to 6.5 mm
2
(0.06 to 0.25"
2
)
Cable clamp size 2 (sachet of 10)
for shielded cable with external diameter 5 to 11 mm
2
(0.19 to 0.43"
2
)
STBXSP3020
STB XSP 3000
STB XSP 3010/3020
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com