Installation guide

38
Presentation
description
Advantys
™
STB Distributed I/O
Solution 0
Digital Input/Output Modules
Advantys STB digital input/output modules consist of:
b Input modules.
b Static output modules.
b Relay output modules.
The range of basic digital I/O modules comprises :
b 3 digital input modules:
v 4, 6 and 16 input channels c 24 V.
b 3 digital output modules:
v 4, 6, and 16 output channels c 24 V.
The range of standard digital I/O modules comprises:
b 6 digital input modules:
v 2, 4 and 6 input channels c 24 V.
v 2 input channels a 115 V (2 modules).
v 2 input channels a 230 V.
b 6 digital output modules:
v 2 output channels c 24 V (2 modules).
v 4 and 6 output channels c 24 V.
v 2 output channels a 115 V.
v 2 output channels a 115/230 V.
b 2 relay output modules:
v 2 relays with 1 “NO” contact and 1 “NC” contact.
v 2 relays with 1 “NO/NC” contact.
The front panel of a digital I/O module features:
1 An LED display block providing the following indications:
2 Place for user to insert his own label STB XMP 6700.
3 A color-coded module identification stripe. See color codes on page 6.
4 Two connectors for screw- or spring-type terminals.
(1) RDY is on permanently if the module is operational and flashes in different ways in the
other states.
If ERR is lit or flashing, there is a fault on this module.
For information about the signaling of module and channel states, consult the
“System
hardware components reference guide
” included on the CD-ROM STB SUS 8800 or available
from our website www.us.telemecanique.com
.
(2) Basic I/O modules: A module error is signaled by the ERR LED of the NIM network interface
module of the island.
Presentation
Description
Indication Basic I/O modules Standard I/O modules
Module status: ready,
pre-operational, operational
Green RDY LED Green RDY LED
Module error (1) – (2) Red ERR LED
Status of each channel Green LEDs IN1 to IN16 or
OUT1 to OUT16 depending
on module
Green LEDs IN1 to IN16 or
OUT1 to OUT16 depending
on module
1
2
3
4
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com