Installation guide
28
Description
Advantys
™
STB Distributed I/O
Solution 0
Power Distribution Modules
The front panel of the Advantys STB PDT p10p power distribution modules features:
1 A location for a customized label.
2 A status block with 2 display LEDs (STB PDT 2100/3100 standard module only):
3 A color-coded module identification stripe (red for a 115/230 V, blue for c 24 V).
4 A connector for removable screw-type connectors (STB XTS 1130) or spring-type
connectors (STB XTS 2130) used to connect:
v the sensor power supply for STB PDT 2100/3100 standard modules.
v the sensor/actuator power supply for STB PDT 2105/3105 basic modules.
5 A connector for removable screw-type connectors (STB XTS 1130) or spring-type
connectors (STB XTS 2130) used to connect the actuator power supply
(STB PDT 2100/3100 standard module only).
To be ordered separately:
6 An STB XBA 2200 mounting base, width 18.4 mm (0.72").
This base features:
7 A location for a customized label.
8 A captive grounding screw.
The CD-ROM STB SUS 8800 contains two lots of documentation for the PDM power
distribution modules in 5 languages:
b “System hardware components reference guide.”
b “System planning and installation guide.”
These documents can also be downloaded from www.us.telemecanique.com.
(1) IN/OUT LED lit: power supply present on digital I/O modules.
IN/OUT LED not lit: external power supply absent or removable fuse inside the PDM has
blown. Consult the
“System hardware components reference guide” included on the CD-ROM
STB SUS 8800 or available from our website www.us.telemecanique.com
.
Description
Indication Basic PDM modules Standard PDM modules
Sensor bus power supply (1) – Green IN LED
Actuator bus power supply (1) – Green OUT LED
7
2
3
4
5
6
8
1
(STB PDT p100
standard module
only)
(STB PDT p100
standard module
only)
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com