Installation guide

25
Catalog numbers
(continued
)
Connections
Advantys
™
STB Distributed I/O
Solution 0
Network Interface Modules
(1) Template for customizing labels:
- provided on the documentation mini CD-ROM supplied with the network interface modules.
- available from our website www.us.telemecanique.com.
(2) Observe all the recommendations in the “Hardware components reference guide for the
Advantys STB system” included on the CD-ROM STB SUS 8800 or available from our website
www.us.telemecanique.com.
(3) This pin is not connected and can be used as a 24V external device jumper.
Bus extensions: Optional separate parts
Designation Used
for
Type Catalog number Weight
kg
Keying pin Modules – 60 STBXMP7700 –
Removable
connectors
–96STBXMP7800 –
Customizing
labels (1)
I/O bases and
modules
– 25 sheets STBXMP6700 –
Insulated
screwdriver
2.5 mm (0.098")
Screw-type
removable
connectors
Chrome
vanadium
steel
– STBXTT0220 –
CANopen extension connector
STB XBE 2100: connection scheme (2)
The CANopen fieldbus interface is located on the front panel of the STB XBE 2100
extension module.
The pinout is as shown in the following table:
Pin Signal
1 CAN ground (0 V)
2 CAN low bus signal
3 Optional CAN shielding
4 CAN high bus signal
5 No connection (3)
1
2
3
4
5
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com