Installation guide

24
Power supply additional to the c 5 V 1.2 A integrated power supply built into the NIM
network interface modules and the BOS bus extension module. It is installed in the
primary segment or the extension segments.
(2) All STB XTS pppp connectors can accommodate a flexible wire with maximum cross-section
of 1.5 mm
2
(0.06"
2
), including cable end piece. For screw connectors, the maximum
tightening torque is 0.25 Nm (2.21 lb-in).
Internal bus extensions
Designation Use with standard STB Catalog number Weight
kg
EOS internal
bus extension module
Installed at end of segment
(except for the last segment
on the island)
STBXBE1000 –
BOS
internal bus extension module
Installed at the beginning of
each extension segment
STBXBE1200 –
Bus extension module to
CANopen external devices
Installed at the end of the last
segment to connect standard
CANopen devices
STBXBE2100 –
Designation Use Catalog number Weight
kg
Auxiliary power supply
c 24 V/c 5V 1.2A
(1)
Additional power supply for
logic of I/O modules
STBCPS2111 –
STB XBE 1000 STB XBE 1200
STB XBE 2100
STB CPS 2111
Bus extensions: mandatory separate parts
Designation Used
for
Catalog number Weight
kg
Module bases
width 18.4 mm (0.72")
STB XBE 1000 STBXBA2400 0.028
STB XBE 1200 STBXBA2300 0.033
STB XBE 2100 STBXBA2000 0.028
STB CPS 2111 STBXBA2100 0.033
Designation Used for Type Sold in
lots of
Catalog number Weight
kg
2-pin removable
power
connectors
c 24 V (2)
STB XBE 1200 Screw-type 10 STBXTS1120 –
Spring-type 10 STBXTS2120 –
5-pin removable
connectors(2)
STB XBE 2100 Screw-type 20 STBXTS1110 0.006
Spring-type 20 STBXTS2110 0.006
Designation Length Catalog number Weight
kg
Island bus extension cables 0.3 m (0.32 yd) STBXCA1001 –
1.0 m (1.09 yd) STBXCA1002 –
4.5 m (4.92 yd) STBXCA1003 –
10.0 m (10.9 yd) STBXCA1004 –
14.0 m (15.3 yd) STBXCA1006 –
STB XBA 2p00
Catalog numbers
(continued
)
Advantys
™
STB Distributed I/O
Solution 0
Network Interface Modules
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com