Installation guide

17
Presentation (continued)
Advantys
™
STB Distributed I/O
Solution 0
Network Interface Modules
The range of NIM network interface modules comprises 4 basic NIM modules and
7 standard NIM modules.
Each module is dedicated to a specific network or bus:
Network interface modules are powered by an external c 24 V source.
They convert this voltage to c 5 V to supply logic power to the I/O modules of the
primary Advantys STB segment.
These integrated 5 V logic power supplies provide a maximum current of 1.2 A.
This current of 1.2 A can be increased through the addition, in each segment, of an
auxiliary power supply STB CPS 2111 which also provides a maximum current of
1.2 A (see page 30).
Logic power for the I/O modules of the extension segments is provided by the BOS
bus extension module STB XBE 1200 placed at the beginning of these segments.
See page 30.
Network or bus Basic network interface
module
Standard network interface
module
Ethernet network – STBNIP2212
CANopen bus STBNCO1010 STBNCO2212
Modbus Plus
™
network – STBNMP2212
Fipio
®
bus – STBNFP2212
I
NTERBUS
®
bus STBNIB1010 STBNIB2212
Profibus DP bus STBNDP1010 STBNDP2212
DeviceNet network STBNDN1010 STBNDN2212
Power supply for network interface modules
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com