Installation guide

101
Combinations,
catalog numbers,
dimensions
Advantys
™
STB Distributed I/O
Solution 0
Phaseo
®
Regulated Power Supplies
(1) With basic power distribution module STB PDT 3105, installation with 1 or 2 power
supplies only.
If the nominal current values for Phaseo power supplies are exceeded, multiple
power supplies can be used to power NIM, BOS, CPS and PDT modules in
accordance with the above rules (1, 2 or 3 power supplies).
NB:
b
c 24 V power supplies. The input current of the power supplies is:
v Network interface module NIM STB Npp: 0.4 A.
v Bus extension module BOS STB XBE 1200: 0.3 A.
v Auxiliary power supply STB CPS 2111: 0.3 A.
b Power distribution modules. the maximum current is:
v STB PDT 3100 for sensors: 4 A at 30°C (86°F), 2.5 A at 60°C (140°F).
v STB PDT 3100 for actuators: 8 A at 30°C (86°F), 5 A at 60°C (140°F).
v STB PDT 3105 for sensors/actuators: 4 A at 30°C (86°F), 2.5 A at 60°C (140°F).
b ABL 7RE power supply: built-in auto-protect with auto-reset.
b ABL 7RP power supply: built-in auto-protect with auto-reset or manual reset.
EN 61000-3-2 compliant.
Combinations of Phaseo single-phase power supplies with Advantys STB modules
Type of Advantys STB modules NIM network interface module
STB Npp 2212/1010
BOS bus extension module STB XBE 1200
Auxiliary power supply STB CPS 2111
PDM power distribution module
STB PDT 3100/3105 (1)
Sensors Actuators
Installation for
Advantys STB with
1 power supply
ABL7RP2410 (10 A)
2 power supplies
ABL7RE/RP2402 (2 A) ABL7RP2410 (10 A)
3 power supplies
ABL7RE/RP2402 (2 A) ABL7RE/RP2405
(5 A)
ABL7RP2410
(10 A)
Catalog numbers (1)
ABL 7RE single-phase regulated switch mode power supplies
Mains input voltage
47...63 Hz
V
Output
voltage
c V
Nominal
power
W
Nominal
current
A
Auto-protect
reset
Conforming to
standard
EN 61000-3-2
Catalog number Weight
kg
a 100…240
single-phase wide range
24 48 2 auto no ABL7RE2402 0.520
72 3 auto no ABL7RE2403 0.520
120 5 auto no ABL7RE2405 1.000
240 10 auto no ABL7RE2410 2.200
ABL 7RP single-phase regulated switch mode power supplies
Mains input voltage
47...63 Hz
V
Output
voltage
c V
Nominal
power
W
Nominal
current
A
Auto-protect
reset
Conforming to
standard
EN 61000-3-2
Catalog number Weight
kg
a 100...240
single-phase wide range
c 110...220 (2)
24 72 3 auto/man yes ABL7RP2403 0.520
120 5 auto/man yes ABL7RP2405 1.000
240 10 auto/man yes ABL7RP2410 2.200
(1) For other Phaseo power supplies, consult our catalog “Automation and control - Interfaces,
I O splitter boxes and power supplies.”
(2) Compatible input voltage, not indicated on the product.
Dimensions
ABL7RE24pp/ABL7RP24pp ABL7RE2402/2403
ABL7RP2403
ABL7RE2405
ABL7RP2405
ABL7RE2410
ABL7RP2410
Common side view
Mounting on 35 (1.37") and 75 mm (2.95") rails
ABL 7RE2405
ABL 7RP2405
4.72
(120)
1.06
(27)
4.72
(120)
2.12
(54)
5.31
(135)
4.72
(120)
4.72
(120)
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com