User`s guide
FactoryCast Configurator
98
890 USE 152 00 Version 2.0
Setting the XWay Address
Overview XWay is a Telemecanique communications protocol. If you are using the Premium
ETY Embedded Server, you must set its XWay Address.
Accessing the
XWay Address
Dialog
Select Server | Set XWay Address from the menu bar.
Result: The Set XWay Address Service dialog appears.
Setting the XWay
Address
Enter the Host Name or IP Address, and the XWay Address of the Embedded
Server.
The XWay address includes the address destination of the Premium ETY
Embedded Server module and the address source of the PC. FactoryCast Client
will scan a free source in this network from a network.63 nested 10 station address
(net.63 to net.54). You must be careful to leave at least one address free in this
range.
Continued on next page
Note: The IP address of the Embedded Server and any host name should be
assigned by your system administrator.