User`s guide

Default Web Site for Premium
890 USE 152 00 Version 2.0 69
FIP I/O Module Diagnostics Page, Continued
FIP I/O Bus page In FactoryCast Client, there is a button at the bottom of the FIP I/O activity page,
named Bus FIP I/O exploration.
If you click on this button, the FIP I/O Bus page is displayed:
At the top of the page, the number of FIP I/O devices configured on FIP I/O Bus is
displayed. A scroll window displays all configured devices on FIP I/O Bus.
A small circle indicates the device connection point. If a FIP I/O Device is in fault,
the background color of its logical address indicator is red. A FIP I/O device module
in fault is also displayed when the box containing the module number has a red
background color.
Continued on next page
Note: The button FIP I/O Bus exploration is enabled only if a FIPIO bus is
configured in the PLC application. Otherwise, the button is disabled
(grayed).
Note: A FIP I/O device displayed in fault by FIP I/O Bus page is also displayed
in fault by FIP I/O devices in the fault list of FIP I/O activity page.