User`s guide

890 USE 152 00 Version 2.0 27
3
Default Web Site for Quantum
At a Glance
Purpose When you receive the Server, it already contains a default Web site with diagnostic
pages and the Data Editor.
You may view these pages and view direct addresses in the Data Editor simply by
installing the module and configuring its IP address. To access the site, type the
Domain name or IP address of the module in your browser and enter the default
user name and password of “USER”. However, Schneider Automation
recommends that you complete the setup procedures that begin with
FactoryCast
Configurator
on page 79.
This section describes the pages in the default Web site.
In This Chapter This chapter contains the following sections:
For This Topic... See Section... On Page...
Introductory Pages 1 28
Local Rack Diagnostics 2 32
Controller Diagnostics 3 34
Ethernet Module Diagnostics 4 36
Remote I/O Diagnostics 5 38
Distributed I/O Diagnostics 6 45