User`s guide

Alarm Viewer
222
890 USE 152 00 V.2
Display
Select Server | Alarm Viewer.
The display is composed of:
1. Button bar (in the work area),
2. List of alarms,
3. Status frame.
Button bar The button bar contains five buttons:
This button is used to acknowledge a selected alarm in the list. A request is
sent to the PLC (Diagnostic Buffer).
This button is used to acknowledge all alarms in the list that can be
acknowledged. A request for each alarm is sent to the PLC
This button is used to delete a selected alarm in the list. There is no request
sent to the PLC. This command affects only the alarm list in Alarm Viewer.
This button is used to delete all alarms in the list that can be deleted. There
is no request sent to the PLC. This command affects only the alarm list in
Alarm Viewer.
This button displays a frame that contains help.
Continued on next page
Note: “Alarm Viewer” is a “Plug-in” You must download it before you can use it.