User`s guide

Editors
216
890 USE 152 00 V.2
Graphic Objects, Continued
Rotary Selector A Rotary Selector allows a user to make a selection from a set of choices. When a
selection is made, the value corresponding to the choice is sent to the PLC. The
choices are shown as labels of a “scale,” with the current selection indicated by the
position of the knob. The size of the circular dial (degrees sweep of a circle) and
knob color can be set.
Continued on next page
Property Description Limits
Name The name for the graphic object
Address The direct address (or the name of a variable) to
get/set
See Note 1
Data Type The data type of the direct address or variable See Note 2
Background The background color for the graphic object
Choices The choices for the selector. Each choice is given
as a ‘label=value’ entry (when a user selects ‘label,’
‘value’ is sent to PLC)
Minimum of
two choices
required
Label The label to be displayed as part of the graphic
object
Label Color The color for the label
Label Font The font for the label
Scale Visible Indicates whether a “scale,” labeled with the
choices, is to be shown
Scale Color The color for the scale and its labels
Scale Font The font for scale labels
Dial Degrees
Sweep
The amount of a circular arc to use for drawing the
dial
60 to 300
Knob Color The color for the knob
Border Width The width (in pixels) for the graphic object’s border 0 to 32
Border Color The color for the graphic object’s border