User`s guide

Editors
214
890 USE 152 00 V.2
Graphic Objects, Continued
Analog Meter,
Continued
Continued on next page
Maximum EU
Value
The maximum value, in engineering units, of the direct
address or variable
Minimum EU
Value
The minimum value, in engineering units, of the direct
address or variable
Maximum PLC
Value
The maximum raw (unscaled) value of the direct
address or variable in the PLC
See Note 3
Minimum PLC
Value
The minimum raw (unscaled) value of the direct
address or variable in the PLC
See Note 3
Dial Degrees
Sweep
The amount of a circular arc to use for drawing the dial 60 to 300
Pointer Type The type (needle, arrow head, etc.) of pointer to use
Pointer Color The color for the pointer
Dial Color The color for the dial (that part that is within the High/
Low limits)
High High Limit
Value
The value in engineering units for the ‘High High’ limit
High High Limit
Color
The color for the part of the dial that is greater than the
‘High High’ limit
High Limit Value The value in engineering units for the ‘High’ limit
High Limit Color The color for the part of the dial that is greater than the
‘High’ limit
Low Limit Value The value in engineering units for the ‘Low’ limit
Low Limit Color The color for the part of the dial that is less than the
‘Low’ limit
Low Low Limit
Value
The value in engineering units for the ‘Low Low’ limit
Low Low Limit
Color
The color for the part of the dial that is less than the
‘Low Low’ limit
Border Width The width (in pixels) for the graphic object’s border 0 to 32
Border Color The color for the graphic object’s border
PLC Value A simulated, raw (unscaled) input value for testing the
graphic object
See Note 3