User`s guide

Editors
890 USE 152 00 V.2 209
Graphic Objects, Continued
Horizontal or
Vertical Slider,
Continued
Horizontal or
Vertical Selector
A Horizontal or Vertical Selector allows a user to make a selection from a set of
choices. When a selection is made, the value corresponding to the choice is sent to
the PLC. The choices are shown as labels of a “scale,” with the current selection
indicated by the position of the “thumb” of a scrollbar.
Continued on next page
Minor Scale
Divisions
The number of minor (unlabeled) scale divisions 0 to 100
Scale Color The color for the scale and its labels
Scale Font The font for scale labels
Scale Precision The number of fractional digits to be shown for scale
labels (Set to -1 to use a general exponential format.)
-1 to 6
Maximum EU
Value
The maximum value, in engineering units, of the direct
address or variable
Minimum EU
Value
The minimum value, in engineering units, of the direct
address or variable
Maximum PLC
Value
The maximum raw (unscaled) value of the direct address
or variable in the PLC
See Note 3
Minimum PLC
Value
The minimum raw (unscaled) value of the direct address
or variable in the PLC
See Note 3
Unit Increment The amount that the scaled value should change when
the scrollbar’s arrow buttons are clicked
Block
Increment
The amount that the scaled value should change when
the scrollbar’s scroll area is clicked
Border Width The width (in pixels) for the graphic object’s border 0 to 32
Border Color The color for the graphic object’s border
Property Description Limits
Name The name for the graphic object
Address The direct address (or the name of a variable) to get/set See Note 1
Data Type The data type of the direct address or variable See Note 2
Background The background color for the graphic object
Choices The choices for the selector. Each choice is given as a
‘label=value’ entry (when a user selects ‘label,’ ‘value’
is sent to PLC)
Minimum of
two choices
required
Label The label to be displayed as part of the graphic object