User`s guide

Editors
194
890 USE 152 00 V.2
Top Window User Functions, Continued
Layout Dialog The “Layout Dialog” allows you to change the position and size of a group of
graphic objects.
The controls of the "Layout Dialog" provide the following functions:
l For aligning graphic objects’ edges, the “Right”, “Bottom”, “Left”, and “Top”
buttons cause the currently selected graphic objects to be moved so that their
specified sides are at the same position. At least two graphic objects must be
selected for these buttons to be enabled.
l For aligning graphic objects’ centerlines, the “Horizontally”, and “Vertically”
buttons cause the currently selected graphic objects to be moved so that their
vertical or horizontal centerlines, respectively, are at the same position. At
least two graphic objects must be selected for these buttons to be enabled.
l For positioning graphic objects so that they are evenly spaced, the
“Horizontally” and “Vertically” buttons cause the currently selected graphic
objects to be moved so that either the horizontal or vertical spacing between
the objects is the same. At least three graphic objects must be selected for
these buttons to be enabled.
Continued on next page