User`s guide

Custom Pages
890 USE 152 00 V.2 157
Downloading Other Protected Pages
Overview If you are adding supporting Web pages to the default Web site, you may choose to
protect them with the same user name and password as the default pages.
In order to add password-protected pages to the site, you must specify the
directory where they are located and then download them to the server.
Specifying File
Locations
Place the files for your Web pages and any images for the pages in a single
directory.
Be sure all file names conform to DOS 8.3 format (no more than eight letter file
name and three letter extension). The file names should be lower case (ie.
machine1.htm).
Use the File Locations dialog to specify the location of the files. (Refer to
Setting
File Locations
on page 94.)
Download
Options
If you are only downloading the password-protected Web pages and related
images, you can use the Commands | Download | Protected | All Files option.
Procedure Follow the steps in the table below to download to the server.
Note: Remember to create new hyperlinks to the other web pages so you can
access them in the browser.
Steps Action
1
Select an option from the Commands
| Download | Protected | All Files menu.
Result: The Download Confirmation dialog appears with the IP address and any
host name of the Embedded Server.
Note: If the IP address or host name is incorrect, make the appropriate changes
in the IP Address dialog. (Refer to
Setting the IP Address on page 96.)
2 Click OK to confirm the IP address and begin the download.