User`s guide

FactoryCast Configurator
890 USE 152 00 Version 2.0 151
Updating I/O Module Descriptions
Overview Over time, the I/O module descriptions for the modules displayed in the default
Web pages may become outdated. Schneider Automation will make available, from
time to time, new I/O module descriptions to be downloaded to the Embedded
Server module.
When you receive a new I/O module description file from Schneider Automation,
follow the procedure below to download the file to the server.
Procedure Follow the steps in the table below to download updated I/O module
descriptions.
Steps Action
1
Select Commands
| Download | Advanced | Module Descriptor File from the
menu bar.
Result: The Download Module Descriptor dialog appears and prompts you for
the IP address and host name of the Embedded Server.
Note: If the Host Name or IP Address is incorrect, make the appropriate changes
in the IP Address dialog. (Refer to
Setting the IP Address on page 96.)
2 Click “OK”.