User`s guide

FactoryCast Configurator
140
890 USE 152 00 Version 2.0
How to Remove
Overview This section provides a procedure for using any of the options on the Commands |
Remove menu.
Procedure Follow the steps in the table below to remove information from the Server.
Step Action
1 Select an option from the Commands | Remove menu.
Result: The Remove Confirmation dialog appears with the IP address and host
name of the Embedded Server as well as a file path entry field.
Note: If the IP address or host name is incorrect, make the appropriate changes
in the IP Address dialog. Refer to Setting the IP Address on page 96.
2 Enter the appropriate path and file or use the ellipses button to find the file to
select.
3 Click OK to confirm the IP address and begin the removal process.