User guide

10
Standards and Compliances
European
Directives and
Standards
The Lexium 17D servo drives are incorporated into an electrical plant and into
machinery for industrial use.
When the servo drives are built into machines or a plant, do not operate the servo
drive until the machine or plant fulfills the requirements of these European
Standards:
l EC Directive on Machines 89/392/EEC
l EC Directive on EMC (89/336/EEC)
l EN 60204
l EN 292
In connection with the Low Voltage Directive 73/23/EEC, the associated standards
of the EN 50178 series in conjunction with EN 60439-1, EN 60146 and EN 60204
are applied to the servo drives.
The manufacturer of the machine or plant is responsible for meeting the
requirements of the EMC regulations.
EC Directive
Compliance
Compliance with the EC Directive on EMC 89/336/EEC and the Low Voltage
Directive 73/23/EEC is mandatory for all servo drives used within the European
Community.
The Lexium 17D servo drives were tested by an authorized testing laboratory and
determined to be in compliance with the directives identified above.
Continued on next page