Installation guide

RIO Network Hardware Components
890 USE 101 00 October 2006 93
Recommended Materials for Fiber Optic Links
Overview Modicon does not manufacture fiber optic products such as cables, connectors, or
special tools. However, we have experience with third party suppliers of materials
and can provide some guidelines on what will work with our products.
Connectors The following table shows recommended connectors.
Termination Kits The following table indicates recommended termination kits.
Passive
Couplers
The AMP Model 95010-4 is a pig tail option and must be used with an enclosure (use
AMP Model 502402-4, a 19 in. rack-mount enclosure, 1.7 in. high).
Light Sources,
Power Meters
For Photodyne light sources and power meter products, contact 3M Telecom
Systems Division. See RIO Cable Material Suppliers, p. 143 for contact information.
Connector Type Part Number Operating Temperature
ST Bayonet (Epoxy) 3M 6105 -40 ... +80° C
ST Bayonet (Hot Melt) 3M 6100 -40 ... +80° C
ST Bayonet (Epoxy) AMP 501380 Series -30 ... +70° C
ST Cleave and Crimp AMP 504034 Series -40 ... +65° C
Mechanical Line Splice (one
size fits all)
3M 2529 Fiberlok1 II -40 ... +80° C
Kit Type Part Number Description
Bayonet or Push-Pull ST
(Hot Melt)
3M 6355 110 VAC, only for 3M connectors
Bayonet ST (Epoxy) AMP 501258-7 110 VAC, only for AMP connectors
Bayonet ST (Epoxy) AMP 501258-8 220 VAC, only for AMP connectors
Mechanical Line Splice 3M 2530 Fiber Splice Prep Kit, complete with
cleaving tool
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com