Installation guide

RIO Network Hardware Components
90
890 USE 101 00 October 2006
Fiber Optic Repeater
Overview The 490NRP954 Fiber Optic Repeater provides communication between two or
more RIO nodes or segments of networks over the fiber optic medium. Each
repeater contains one electrical RIO interface and two fiber optic transceivers.
11.5 in. (292 mm)
Allow 4.0 in. (100 mm) Rear Clearance for
Access to Switches, Cables, and Fuse
8.3 in.
(211 mm)
5.25 in.
(133 mm)
1.53 in.
(39 mm)
12.83 in. (326 mm)
14.08 in. (358 mm)
Top View
Rear View
24 VDC
Connection
Shield Configuration
jumper switch
Fiber Port 1
Tx Rx
Fiber Port 2
Rx Tx
2.59 in.
(66 mm)
Power Selector
Plug and Fuse
Power Cable
Connector
Power
Switch
Chassis Ground Screw
RIO Coaxial Cable
Connection
Power Cable
Strain Relief
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com