Installation guide

890 USE 101 00 October 2006 9
About the Book
At a Glance
Document Scope This manual is intended for the design engineer, cable system installer and network
manager involved with a Modicon Remote I/O (RIO) network. The manual
describes:
z design, installation, test, and maintenance procedures for the RIO network
z required media hardware—e.g., cables, taps, connectors, fiber optic options,
tools—and approved optional hardware for special situations and environments
z RIO communication processing devices used with the Quantum Automation
Series CPUs and the 984 family of PLCs
z recommended installation and maintenance tests for the RIO network
Validity Note The data and illustrations found in this book are not binding. We reserve the right to
modify our products in line with our policy of continuous product development. The
information in this document is subject to change without notice and should not be
construed as a commitment by Schneider Electric.
User Comments We welcome your comments about this document. You can reach us by e-mail at
[e-mail]
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com