Installation guide

RIO Network Hardware Components

890 USE 101 00 October 2006

F Adapters for Semirigid Cable

Overview A Modicon 52-0480-000 Right Angle F Adapter is usually needed to attach semi-

rigid trunk cable to the F connector on a tap port; it may also be necessary at other

connection points in order to maintain bend radius tolerance on a semirigid cable.

Modicon has also approved the FF90FM right-angle F adapter manufactured by

LRC Electronics and the GFMF/90 right-angle F adapter manufactured by Gilbert

Engineering. See RIO Cable Material Suppliers, p. 143 for contact information.

3/8 - 32 THD

.032 Diameter

7/16 in. Hex

1.155 in.

Accepts

18-20 AWG Wire

This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com