Installation guide

RIO Network Hardware Components
890 USE 101 00 October 2006 77
Interconnections F connector, torque 90 in./lb
max
F connector, torque 90 in./lb
max
Note: Splitters not supplied by Modicon will not be supported by Modicon.
Note: The Modicon MA-0186-000 splitter can be used in an RIO network if the
splitter is at least Revision B. Do not use a lower revision of the MA-0186-000
splitter.
Note: Existing systems that utilize the MA-0186-X00 as a trunk splitter are not
required to upgrade to MA-0331-000 if performance is acceptable. The MA-0331-
000 splitter provides higher port isolation.
MA-0186-100 MA-0331-000
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com