Installation guide

RIO Network Hardware Components
890 USE 101 00 October 2006 73
RIO Coaxial
Cable System
Hardware
Components
The following table shows the RIO coaxial cable system hardware components.
Description Part Number
Tap MA-0185-100
Splitter Hot Standby system use MA-0186-100
used for trunk splitter MA-0331-000
F Connectors quad shield RG-11 (6/bag) 490RIO00211
quad shield RG-6 (10/cassette) MA-0329-001
Right angle F connector 52-0480-000
BNC connectors non-quad shield RG-6 52-0487-000
quad shield RG-6 043509446
F-to-BNC Adapter 52-0614-000
BNC Jack to male F connector 52-0724-000
Tap port terminator 52-0402-000
Trunk terminator 52-0422-000
BNC In-line terminator 60-0513-000
Self-terminating BNC
Adapter
Hot Standby system and drop
use
52-0370-000
Hot Standby Processor
Warning Label
Hot Standby system use MD-9423-000
Self-terminating F
Adapter
Hot Standby system and drop
use
52-0399-000 (non-quad shield
RG-6)
Hot Standby system and drop
use
52-0411-000 (quad shield RG-
6)
Ground block 60-0545-000
Surge suppressor CBT-22300G (Relcom)
Semirigid Connectors QR540JCA Cable
QR869JCA Cable
AI540FMQR (CommScope)
AI860FMWQR (CommScope)
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com