Installation guide

Installing an RIO Network
890 USE 101 00 October 2006 109
Installing F Connectors on RG-11 Cable
Overview
Installing F
Connectors
The following steps demonstrate how to install F connectors.
Note: Use a 490RIO002111 F connector and prepare the cable according to the
procedure described below.
Step Action
1 Cut the cable squarely across the end with the 60-0558-000 Cable Cutters.
2 Slide connector assembly over the cable as shown.
3 Open the jaws of the 490RIO0S411 Installation tool and set the cable in the
trough with the cable end placed lightly against the cable stop
Rotate Tool
Cable Stop
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com