Installation guide

Installing an RIO Network
890 USE 101 00 October 2006 105
Installing BNC or Self-terminating F Connectors on RG-6 Cable
Overview The following procedure may be used to install either a BNC connector or a self-
terminating F adapter on an RG-6 cable. The BNC connector and self-terminating F
adapter are available in two versions that fit non-quad shield and quad shield cable.
Make sure that you are using the proper size connector for the cable.
Connector Type Cable Type Connector Part # Crimp Size
BNC Non-quad 52-0487-000 0.324
BNC Quad 043509446 0.360
Self-terminating F Non-quad 52-0399-000 0.324
Self-terminating F Quad 52-0411-000 0.360
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com