Installation guide

Installing an RIO Network
890 USE 101 00 October 2006 103
3 Remove the F connector by sliding it out the side of the cassette.
4 Align the 60-0544-000 Crimp Tool on the F connector, and apply a .360 in crimp.
5 Pull on the F connector to make sure that the crimp is snug—the connector
should not fall off.
Step Action
Crimp
.360
Pull
Slightly
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com