User guide

Communication Capabiliites
78
890 USE 108 00 August 2001
Setting the slide switch to the bottom position enables you to use software to
configure the values of the communication port parameters.
The following table lists the communication port parameters that you can configure
if the slide switch is set to the bottom position (using software). The table includes
the valid values for the parameters.
CTS/RTS
Communication
Delays for
Communication
Port 1
Your application may require the use of time delays. (For more information, see
CTS/RTS Communication Delays for Communication Port 1 (E984-258/265/275/
285 Only), p. 21).
Parameter Range of Valid Values
Baud 19,200 1,200
9,600 600
7,200 300
4,800 150
3,600 134.5
2,400 110
2,000 75
1,800 50
Parity Enable/Disable Odd/Even
Data Bits 7/8
Stop Bits 1/2
Device Address 1 ... 247