User guide

Hardware
890 USE 108 00 August 2001 45
Storing to the
PCMCIA or
Internal FLASH
Card
Save to FLASH stores information to the PCMCIA or internal FLASH card. The
following table describes the options that are available from the Save to Flash
screen. When the save to FLASH is performed, the configuration, IEC and 984 LL
are all stored to the PCMCIA card or internal FLASH depending on your selection.
Option Description
Internal Stores, RAM information to the internal on board FLASH of the
PLC.PCMCIA stores, RAM information to the PCMCIA card.
Start After Power Up Automatically starts the PLC after downloading an application
from the PCMCIA card
Stop After Power Up Automatically stops the PLC after downloading an application
from the PCMCIA card
Allow Editing After Power
Up
Allows edits after download to controller.
Save State RAM Stores the information in 4x registers to the PCMCIA card
Number of 4x Registers
to Save
Determines the number of 4x registers to save to the PCMCIA
card
Clear FLASH erases the information on the PCMCIA card or in internal FLASH
Note: Five PCMCIA card pull-tabs (individual part number 042710748) ship with
these PLCs for better card extraction. Additional pull-tabs may be purchased in
quantities of fives (part number 042710786). (See PLC Accessories, p. 194 for
recommended PCMCIA cards.)