User guide

Troubleshooting and Maintenance
214
890 USE 108 00 August 2001
0202 modbus cmd-length is zero
0203 modbus abort command error
0204 run output active failed
0205 bad mbp response opcode
0206 mbp out of synchronization
0207 mbp invalid path
0208 page 0 not paragraph aligned
0209 bad receive communication state
020A bad transmit communication state
020B bad communication state trn_asc
020C bad communication state trn_rtu
020D bad communication state rcv_rtu
020E bad communication state rcv_asc
020F bad modbus state tmr0_evt
0210 bad modbus state trn-int
0211 bad modbus state rcv-int
0212 stack error in MB cmd hndlr
0213 host ifc opcode unknown
0214 host ifc diagnostic failed
0215 host addr xlat error
3 0301 bus grant not received
0302 not master asic on cpu
0303 master config write bad
0304 lms bus DPM write failure
0305 plc asic loopback test asic/dpm
0306 plc asic BAD_DATA
4 0401 P.O.S.T BAD MPU ERROR
0402 BAD INTERRUPT
0403 ram error during sizing
0402 mbp bus interface error
0405 timeout waiting for mbp
0406 bad external uart hardware
0407 bad external uart interrupt
0408 bad RTC hardware