User guide

CE Requirements
170
890 USE 108 00 August 2001
This table shows the Parts List for Callouts for Above and Below.
Callout Vendor (or
equivalent)
Part Number Description Instruction
1 Modicon Shipped with
backplane
Plastic Cover Installation is Required.
2 Flat Braid Cable.25in
(6.3mm) or wider
3 Modicon 043509693 Grounding Bar All cable shields must
be grounded.
4Steward
(Outside the
United States
call Livingston,
Scotland at
(0044) 1-506-
414-200)
28 B2400-000 Ferrite Bead
1.37in(34.8mm) I.D.;
2.5in (63.5mm) O.D.;
.44in (11.2mm) Thick
For a BMOT-201
ONLY: All cables
(Motor, I/O, Encoder
and I/O cables) must
pass through this large
ferrite bead. Secure it
with a tie wrap or
equivalent.
5 Braided Shielded
Cable. 80% shield
coverage, #of
conductor and gauge
per user
requirements.