User guide

Getting Started
890 USE 108 00 August 2001 157
Forcing an Input The following is the procedure for forcing an input.
Step Action Result
1 Use the menu command Online->
Reference Data Editor ... to open the RDE
template screen.
2 Click on an address box and type 10001.
3 Click on the disable button in the same row.
4 Click on the value field and type 1 <ENTER>
to force the input on, 0 <ENTER> to force
the input off.
Forces the input On or Off dependent
on the value used (1or 0).
CAUTION
You must enable the input before performing further processing.
Do not forget to enable the input before processing further.
Failure to observe this precaution can result in injury or
equipment damage.