User guide

Getting Started
890 USE 108 00 August 2001 149
Start-Up
Procedure Using
Modsoft with
Your Compact
Stage 4:
Simulating
Turning on the
Input
Use this procedure to simulate turning on the input.
1Hit ALT F2 to move the cursor into the reference data area.
2 Enter 100001.
3 Move cursor to enable field, and enter D to disable.
4 Move cursor to bit field, and enter 1. This turns on output 1. Do not forget to
enable the bit before processing further. Move cursor to enable field, and enter
E to enable.
Note:Do not forget to enable the hit before processing further. Move the cursor to the
enable field, and enter E to enable.