Technical information

9696
Presentation
The Momentum 171CBB97030 processor integrates a full programmable controller,
an Ethernet switch with 4 x 10/100 Mbps ports, and a Modbus serial communication
port. Supporting a wide temperature range from -20 to 70°C,
and powered with 24 V , it also has a realtime clock and a battery for backing
up the memory.
Processor
0.25 ms/Kinstructions.
Concept IEC 61131-1 and ProWorX 32 LL984 program.
Realtime control using Ethernet:
Distributed I/O connectivity
Peer to peer interprocessor communication
Realtime clock.
Battery for backing up data.
19.2...42.5 V  power supply.
Communication
Integrated Ethernet switch with 4 ports.
10/100 Mbps, half/full duplex autonegotiated.
RS232/RS485 Modbus serial communication port.
Simple menu-driven conguration.
This integration results in:
A reduction in the number of components required, simplication of the wiring,
lower setup costs.
Unrivalled exibility in designing system architectures: the Momentum
171CBB97030 processor's compact dimensions make it ideal for installation
where space is limited or in small machines.
Direct high-performance Ethernet connectivity to the I/O, other control systems
and HMI terminals.
Faster response times on high-trafc networks thanks to its half/full duplex
communication with autonegotiation.
Setup made easy by simple menu-driven conguration.
Applications
Ethernet 10/100 Mbps communication supports the Modbus TCP/IP protocol,
offering connectivity to the distributed I/O and host systems, communication with
other peer processors, drives, operator and programming terminals, as well as
simple browser access to embedded web pages.
The Modbus serial communication port can be used to connect the processor to any
RS232 or RS485 device in master or slave mode.
The processor program can be expressed in one of the ve IEC 61131-1 languages
in the Concept environment or as a ProWorX 32 Ladder 984 logic diagram.
These capacities make it the ideal processor for distributed I/O and device systems
on Ethernet, for example: intelligent sub-system connected to a master or
supervision processor, multiprocessor distributed processing applications, etc.
The Momentum 171CBB97030 processor is suitable for a wide variety of
applications:
Conveying, handling.
Packaging.
Water/waste treatment.
Infrastructure.
Pumping, RTU, heating, air conditioning.
Batch/process control.
Data acquisition, monitoring.
Presentation
Modicon STB distributed I/O
solution
Momentum 171CBB97030 processor
Open and modular system
171CBB97030
3.0